Baja Spearfishing Freediver Layered - Vinyl Sticker
This is the layered Baja Spearfishing Freediver sticker and this design measures
Small - 7" x 6.4"
Medium - 10" x 9.2"
Large - 14" x 12.8"
Vinyl Sticker Application Instructions
The vinyl sticker is actually in three pieces - they're just all stuck together. They are:
1. Transfer Tape - The foggy paper covering your vinyl decal.
2. Vinyl Decal - The actual design that you spent your hard-earned $$$ on.
3. Paper Backing - The paper that is backing your vinyl decal (duh).
Clean the area that you want to stick the decal to. The sticker will not stick properly if the area is dirty. You can use rubbing alcohol to clean the area. Then allow the area to dry.
Peel the transfer tape off the paper backing. When doing this, make sure the vinyl decal remains stuck to the transfer tape.
Apply the transfer tape (vinyl decal side down) to the cleaned area. Using a drivers license or credit card as a flat edge, slowly squeegee the decal onto the surface (moving from top to bottom), making sure you forced out any air bubbles as you go.
Once all the air bubbles are out, carefully peel up the transfer tape, leaving the vinyl in place. Note, if you still have air bubbles you can poke a hole in it with a pin and squeegee out the air.
For best results allow 24 hours before the decal gets wet.
Medium (add $2.00)
Large (add $5.00)
Add to Cart
H2O Vinyl Designs
(No Reviews Posted Yet - be the first!)
0 Related Products
- Fishing/Fish Stickers
- Fish Attracting Stickers
- Freediving Stickers
- Scuba Diving Stickers
- Baby On Board Stickers
Blackneck Adventures Line
Videos by H2O Vinyl Designs
© 2019. H2O Vinyl Designs | ie9+ |
Product Added to your Cart
proceed to checkout
-------- OR --------
Modal Dialog Title
Modal Dialog Content